这篇文章主要讲解了“Shell实现的iptables管理脚本的方法教程”，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习“Shell实现的iptables管理脚本的方法教程”吧！

代码如下:

#!/bin/bash
while true
do
clear
echo "----------------------menu----------------------"
echo "(1) service iptables restart"
echo "(2) iptables add"
echo "(3) iptables delete"
echo "(4) iptables stop"
echo "(5) iptables save(不推荐使用这种模式)"
echo "(6) iptables status"
echo "(7) iptables ACL list"
echo "(0) exit"
echo "会在当前的目录下生成一个fw.sh文件"
echo "-------------------------------------------------"
echo -n "enter you chose[0-7]:"
read num
if [ ${num} -lt 0 -o ${num} -gt 7 ]
    then
      echo "this is not between 0-7"
else
   if [ "${num}" == "1" ]
      then
      service iptables restart&
else
   if [ "${num}" == "2" ]
#######################################################
       then
          while [ "1" == "1" ]
          do
          clear
          echo "----------------------add ACL----------------------"
          echo "(1) 针对源IP放行添加"
          echo "(2) 针对服务器端口放行添加"
          echo "(3) 针对有端口和服务的ACL添加（这里要参数IP和端口 例如 0/0 80）"
          echo "(4) 自定义添加"
          echo "(5) 退回上一级"
          echo "-------------------------------------------------"
          echo -n "enter you chose[0-4]:"
          read aclnum
          if [ "${aclnum}" == "1" ]
             then
             read ip
             iptables -A INPUT -s ${ip} -p tcp --dport 22 -j ACCEPT
         echo "iptables -A INPUT -s ${ip} -p tcp --dport 22 -j ACCEPT" >>fw.sh
#            service iptables save
          elif [ "${aclnum}" == "2" ]
             then
             rad ip
             iptables -A INPUT -p tcp --dport ${IP}  -j ACCEPT
         echo "iptables -A INPUT -p tcp --dport ${IP}  -j ACCEPT" >>fw.sh
#            service iptables save
          elif [ "${aclnum}" == "3" ]
             then
             read ip port
             iptables -A INPUT -p tcp -s ${ip} --dport ${port} -j ACCEPT
             echo "iptables -A INPUT -p tcp -s ${ip} --dport ${port} -j ACCEPT" >>fw.sh
#            service iptables save
          elif [ "${aclnum}" == "4" ]
             then
             read addacl
             `${addacl}`
             service iptables save
          else
             break
          fi
          echo -n "是否想继续添加: [y/n]:"
          read contine
          if [ "${contine}" == "n" -o "${contine}" == "N" ]
             then
             break
             fi
          done
#######################################################
else
   if [ "${num}" == "3" ]
          then
          while [ "1" == "1" ]
          do
          clear
          echo "---------------------delete ACL----------------------"
          echo "(1) 针对源ip删除"
          echo "(2) 针对端口删除"
          echo "(3) 针对有端口和服务的ACL删除"
          echo "(4) 自定义删除"
          echo "(5) 退回上一级"
          echo "-------------------------------------------------"
          echo -n "enter you chose[0-5]:"
          read aclnum
          if [ "${aclnum}" == "1" ]
             then
             read ip
             iptables -D INPUT -s ${ip} -p tcp --dport 22 -j ACCEPT
             echo "iptables -D INPUT -s ${ip} -p tcp --dport 22 -j ACCEPT" >>fw.sh
#            service iptables save
          elif [ "${aclnum}" == "2" ]
             then
             read port
             iptables -D INPUT -p tcp --dport ${port}  -j ACCEPT
             echo "iptables -D INPUT -p tcp --dport ${port}  -j ACCEPT" >>fw.sh
#            service iptables save
          elif [ "${aclnum}" == "3" ]
             then
             read ip port
             iptables -D INPUT -p tcp -s ${ip} --dport ${port} -j ACCEPT
         echo "iptables -D INPUT -p tcp -s ${ip} --dport ${port} -j ACCEPT" >>fw.sh
#            service iptables save
          elif [ "${aclnum}" == "4" ]
             then
             read deleteacl
             `${deleteacl}`
             service iptables save
          else
             break
          fi
          echo -n "是否想继续添加: [y/n]:"
          read contine
          if [ "${contine}" == "n" -o "${contine}" == "N" ]
             then
             break
             fi
          done
###################################################################
else
   if [ "${num}" == "4" ]
       then
       echo -e "`service iptables stop&` "
else
   if [ "${num}" == "5" ]
       then
       echo -e "`service iptables save&`"
else
   if [ "${num}" == "6" ]
       then
       echo -e "`service iptables status&`"
else
   if [ "${num}" == "7" ]
       then
         while [ "1" == "1" ]
       do
       clear
       echo "---------------------list ACL----------------------"
       echo "(1) 查看当前正在使用的规则集"
       echo "(2) 查看每个策略或每条规则、每条链的简单流量统计"
       echo "(3) 查看NAT表"
       echo "(4) 自定义查看"
       echo "(5) 退回上一级"
       echo "-------------------------------------------------"
       echo -n "enter you chose[0-5]:"
       read aclnum
       if [ "${aclnum}" == "1" ]
          then
          iptables -L
       elif [ "${aclnum}" == "2" ]
          then
          iptables -L -n -v
       elif [ "${aclnum}" == "3" ]
          then
          iptables -L -t nat
       elif [ "${aclnum}" == "4" ]
          then
          read listacl
          `${listacl}`
       else
        break
         fi
       echo -n "是否想继续添加: [y/n]:"
          read contine
          if [ "${contine}" == "n" -o "${contine}" == "N" ]
             then
             break
          fi
       done
################################################
else   
   exit
fi
  fi
    fi
     fi
      fi
       fi
        fi
         fi
echo -n "Do you contine [y/n]:"
read contine
if [ "${contine}" == "n" -o "${contine}" == "N" ]
   then
   exit
fi
done

感谢各位的阅读，以上就是“Shell实现的iptables管理脚本的方法教程”的内容了，经过本文的学习后，相信大家对Shell实现的iptables管理脚本的方法教程这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是创新互联网站建设公司，，小编将为大家推送更多相关知识点的文章，欢迎关注！